Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Amateur hour
EricPeterson
Member Posts: 270
For your amusement…
I’m not a pro, but I like to do my own work whenever possible. That includes pipe-fitting. Years ago when I would visit my Mom I would always check the "for sale" section in the local paper for tools. I came back one time with this pipe vise and reamer along with some old threaders (not pictured - another time).
The Westward kit was from Grainger Supply and has worked well handling up to 1-1/4” pipe. I accidentally tossed the 3/4" head and that's a Ridgid replacement. Needs a different ratchet though.
Cheers, Eric Peterson
1
Comments
-
-
Who needs a ratchet. You don't need no stinkin' ratchet.
That is what pipe wrenches are for.Edward Young Retired
After you make that expensive repair and you still have the same problem, What will you check next?
2 -
gets the job done.1
-
When I got my first job with a commercial/industrial boiler company in 1974, after working 6 years in residential, everything we threaded from 1/8" through 4" was done by hand. Then the company bought a used Ridgid 700 and after that I was spoiled. @EricPeterson that type pipe vise would work but you just need to upgrade to a chain vise to do a better job.1
-
-
Categories
- All Categories
- 86.8K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 425 Carbon Monoxide Awareness
- 108 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 962 Plumbing
- 6.3K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements