Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Leaking control well

Options
Has anyone had trouble with leaking LF Brass aqua stat control wells? I've had two leakers on the same job. One leaked within a day and the replacement is leaking 10 months later. Leaking at the braze where the tube attaches to the threaded boss.

Comments

  • EdTheHeaterMan
    EdTheHeaterMan Member Posts: 7,834
    Options
    In my over 40 years of service, I have never come across that problem. The kids these days can't even make the good old "stupid proof" parts without screwing them up.

    Back in my day we would not tolerate this nonsense!
    Edward F Young. Retired HVAC ContractorSpecialized in Residential Oil Burner and Hydronics
  • Steamhead
    Steamhead Member Posts: 16,835
    Options
    @ScottHerold , who is "LF Brass" and where are you buying these wells? What controls are you using them with?
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • hot_rod
    hot_rod Member Posts: 22,139
    Options
    LF is lead free brass. If it touches potable water it needs to be LF
    More accurately it is low lead, it’s a weighted average they test to get the certification. It wouldn’t be brass without some lead.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Steamhead
    Steamhead Member Posts: 16,835
    Options
    hot_rod said:

    LF is lead free brass. If it touches potable water it needs to be LF
    More accurately it is low lead, it’s a weighted average they test to get the certification. It wouldn’t be brass without some lead.

    Thanks- @ScottHerold , who made the wells?
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting