Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Anybody interested in old Taco diverter tees before I junk them?

newtonkid88
newtonkid88 Member Posts: 104
edited July 2022 in Radiant Heating
I’ve removed my old monoflo loop. Before I junk everything, I’m wondering if anybody wants the Tees. Just cover the cost of shipping. They are most likely 60 years old. They still worked last year. But honestly, if I cant un-thread it with just a propane torch, i’m gonna junk it.

1” x 1/2”




Comments

  • hot_rod
    hot_rod Member Posts: 25,059
    Are they brass or cast iron?
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • newtonkid88
    newtonkid88 Member Posts: 104
    hot_rod said:
    Are they brass or cast iron?
    I’m almost positive they are not brass, i’ll put a magnet to it later. The pipe itself is black iron or black steel. 
  • newtonkid88
    newtonkid88 Member Posts: 104

Categories