Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Can anyone ID this radiator

Options
cross_skier
cross_skier Member Posts: 201
in Strictly Steam
Measuring almost 4 feet wide, less than 4" thick.  I wonder how it would do on a single pipe system.

https://www.ebay.com/itm/115096573913

Comments

  • mattmia2
    mattmia2 Member Posts: 9,641
    Options
    It is a little more ornate than most but it is a pretty standard wall hung utility radiator.
  • cross_skier
    cross_skier Member Posts: 201
    Options
    Thanks.  Do you know if they are as quiet as a normal steam radiator
  • Steamhead
    Steamhead Member Posts: 16,835
    Options
    Yes, they are.
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • cross_skier
    cross_skier Member Posts: 201
    Options
    Thanks @Steamhead, I brought it.  I mounting it on a very solid interior brick wall in the front hall.  Any idea what the brackets looked like?

    We are going to do it in gold.  Probably reduces the EDR a bit but it looks like it has enough EDR

  • delcrossv
    delcrossv Member Posts: 742
    Options
    This may help:
    https://ocsind.com/wp-content/uploads/2016/03/15981-OCS-Catalog.Updated15-5.pdf
    Trying to squeeze the best out of a Weil-McLain JB-5 running a 1912 1 pipe system.
  • cross_skier
    cross_skier Member Posts: 201
    Options
    Thanks @delcrossv, that does help
    delcrossv
  • DougP
    DougP Member Posts: 13
    Options
    thanks delcrossv for the link, would like to overhaul this setup post heating season, and looking for additional support hardware as the current setup has the weight of the radiator point loaded on a single support and without enough pitch. Check out the custom piping, don't usually see the spud nut attached outside the radiator. Currently functional and I dont dare mess with it as it is closest to the thermostat and its supposed to get cold this weekend, the BWH1 may be just the thing I need



    delcrossv
  • mattmia2
    mattmia2 Member Posts: 9,641
    Options
    That's uh...creative...
  • Hap_Hazzard
    Hap_Hazzard Member Posts: 2,846
    Options
    My wall mounted raditor uses these stays: https://www.castrads.com/us/product-category/stays-fixings/wall-stays/whitworth/
    I don't know why they call them Whitworth. The threads are metric.
    Just another DIYer | King of Prussia, PA
    1983(?) Peerless G-561-W-S | 3" drop header, CG400-1090, VXT-24
  • cross_skier
    cross_skier Member Posts: 201
    Options
    Thanks @Hap_Hazzard
  • delcrossv
    delcrossv Member Posts: 742
    edited January 2022
    Options
    Glad it's working for you, but I'm a little creeped by a single sling. I'd add another. If it's not deflecting anything, it'll keep until spring.

    Well done. 👍
    Trying to squeeze the best out of a Weil-McLain JB-5 running a 1912 1 pipe system.
  • cross_skier
    cross_skier Member Posts: 201
    Options
    @Erin Holohan Haskell. 
    Thank you!
  • Erin Holohan Haskell
    Erin Holohan Haskell Member, Moderator, Administrator Posts: 2,284
    Options
    You're welcome, @cross_skier. It's always fun browsing through our heating library.
    President
    HeatingHelp.com

Categories