Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Baseray air bleed valve replacement

Options
globodj
globodj Member Posts: 1
in Strictly Steam
Spring project - Base-Ray hydronic cast iron baseboard radiators. Looking for a source to replace all the air bleed valves and reducer plugs (don't know the name of the part) this is where the valve screws into. All these plugs are very corroded. Any advice on how to remove these crumbling corroded plugs without damaging the threads on the radiator?

I will also be needing to source replacement covers. Thanks.

Comments

  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 15,533
    Options
    Don't know what covers you need Baseray doesn't have covers.

    Just wrench the old fittings out. If they snap off you may need to drill & tap if any of them break off. 1/8"ips iron pipe size. Supply house.com should have what you need.
  • mattmia2
    mattmia2 Member Posts: 9,660
    Options
    Are you looking for the trim for the ends? There are a number of different sizes and google shows several sources.

Categories