Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Snow melt/ boiler type
Options
nikos
Member Posts: 16
Hey guys
i have install snowmelt tube 3/4 under my driveway, with insul tarp and covered with tar.
i have install snowmelt tube 3/4 under my driveway, with insul tarp and covered with tar.
The area is 2000 square feet.
Any suggestIons on what type of boiler and btus.
It’s like 10 loops. I will
split in 2 manifolds.
split in 2 manifolds.
Can anyone size it up ?
thanks in advance
thanks in advance
0
Comments
-
-
How we we quickly do you want to melt? 100 btu/sq ft would be the low end. Mod con, heat pump, or copper tube boilerBob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0 -
Tubing is laid on top of concrete slab
then 2” mud job and 2” of asphalt
yes looking to install mod condensing boiler
fill it with glycol
any suggestions?0 -
mod condensing boiler
0 -
This is what I would recommend.. https://www.ibcboiler.com/consumer/products/sl-series/0
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 51 Biomass
- 423 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 60 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 375 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 38 Industry Classes
- 55 Job Opportunities
- 18 Recall Announcements