Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

WANTED: GB142-45 Heat Exchanger

Options
GB142
GB142 Member Posts: 34
in Buy, Sell, Barter
Just throwing it out there to see if "by chance" someone has one in Excellent or new condition. I saw there is a GB142-60 HX on here but I think it is too big.

Comments

  • 347
    347 Member Posts: 147
    This is the one I have. Maybe it will help.
  • GB142
    GB142 Member Posts: 34
    Hi 347. I have sent you several private messages. I am interested in the HX you have. How do I get a hold of you?
  • 347
    347 Member Posts: 147
    I just sent a message back to you.
  • GB142
    GB142 Member Posts: 34
    I am still looking for a GB 142-45 HX
  • GB142
    GB142 Member Posts: 34
    Hi all.... I am still looking for one. If anyone has a new one, I will consider that.

    I need to get it sooner rather than later when it starts to get cold out.
  • Big Ed_4
    Big Ed_4 Member Posts: 3,236
    You can still purchase one off the shelf

    There was an error rendering this rich post.

  • GB142
    GB142 Member Posts: 34
    HI Big Ed. Thanks for the heads up. I thought I might be able to find a one in good shape on the wall, but perhaps it makes more sense to get a new one.
  • Alan (California Radiant) Forbes
    Alan (California Radiant) Forbes Member Posts: 4,503
    I see. They aren't cheap, but at least they're available.

    https://www.supplyhouse.com/Buderus-7738005272-Heat-Exchanger-Kit-for-GB142-45-Boilers
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
  • woobagooba
    woobagooba Member Posts: 186
    Not cheap and maybe not available? Better check ...



    BTW I have spare parts available for a 145-60. Everything but the carcass / HX.
  • Larry Weingarten
    Larry Weingarten Member Posts: 3,895
    Hi @GB142 , Assuming damaged metal, have you looked into getting a good welder to fix the leak?

    Yours, Larry

Categories