Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Giacomini Replacement Valves for Manifold

Does anyone have a source for replacement valves (bonnets) for these manifolds?




8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

Two btu per sq ft for degree difference for a slab

Comments

  • HomerJSmith
    HomerJSmith Member Posts: 2,426
    edited April 2021
    With the carbonate every where on the manifold, you might have to take the valves out clean and re-gasket them. May have to install new manifold.

    https://www.giacomini.com/en/products/spare-parts-manifolds
  • Alan (California Radiant) Forbes
    Alan (California Radiant) Forbes Member Posts: 3,979
    edited April 2021
    Yes, I'm trying to see if that can be avoided.

    Those bayonet expansion manifolds were popular for a time.
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
  • hot_rod
    hot_rod Member Posts: 22,024
    I think Giacomini come in as Legend brand also, maybe try them.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
    Alan (California Radiant) Forbes
  • Thanks, guys. An email to Giacomini last night and a response this morning from Legend. It's nice when things work the way they're supposed to.
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab