Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Any preference for what brand TRV to use?
JohnBoston
Member Posts: 20
Looking into adding some TRVs as part of a bigger long term project - 1" pipe. I'm just looking for basic control, and am not really concerned about the looks.
What do you guys usually use?
https://www.supplyhouse.com/Thermostatic-Radiator-Valves-1523000
What do you guys usually use?
https://www.supplyhouse.com/Thermostatic-Radiator-Valves-1523000
0
Comments
-
Looks like you have a steam system, no?8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab0 -
hot water boiler0
-
I've always used Danfoss.8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab0 -
Thanks0
-
Oventrop or Danfoss0
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.6K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 968 Plumbing
- 6.3K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements