For the circulator museum

Options
hot_rod
hot_rod Posts: 28,532
in THE MAIN WALL
It was a well built bugger. Brass volute, all controls under the hood, connect sensors and run. True, it had some longevity issues.
Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream
GroundUp

Comments

  • kcopp
    kcopp Posts: 4,727
    wow... and it was 24v?!?!?
  • Solid_Fuel_Man
    Solid_Fuel_Man Posts: 2,644
    Cool! The early days of radiant and injection loops? 

    And same as @kcopp 24volts ac or dc? Why?
    Serving Northern Maine HVAC & Controls. I burn wood, it smells good!
  • hot_rod
    hot_rod Posts: 28,532
    Shows both AC and DC input, it came with a large 120- 24V transformer.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Big Ed_4
    Big Ed_4 Posts: 3,585
    I never seen one before..

    There was an error rendering this rich post.

  • hot_rod
    hot_rod Posts: 28,532
    As I recall this manufacturer attended a RPA event and asked what the industry need, came back with this solution. It was when injection mixing was popular.  If you run into Ted Lowe with NTI, he was involved with promoting this circ.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Dave H_2
    Dave H_2 Posts: 627
    I had some success with this circ. I designed quite a few systems with it. I thought it was pretty cool at the time!

    Dave H.

    Dave Holdorf

    Technical Training Manager - East

    Taco, Inc

Categories