Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Ways to break down steam boiler
Dairon421
Member Posts: 81
in Gas Heating
Hey guys, are there other ways to break apart boilers without using a hammer and chisel
0
Comments
-
Some type of wedge and a hammer. If it has draw rods cut them off and put new draw rods on with the nuts and washers on the inside and us them to force the sections apart if you can0
-
-
NO.0
-
You can also cut the sections with an angle grinder with a cutting disk. And you don't have to cut the section completely. Cut what you can and rap it with a hammer0
Categories
- All Categories
- 87K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 58 Biomass
- 427 Carbon Monoxide Awareness
- 113 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 109 Geothermal
- 161 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 994 Plumbing
- 6.3K Radiant Heating
- 391 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 55 Water Quality
- 44 Industry Classes
- 48 Job Opportunities
- 18 Recall Announcements