Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Thanks for the help
Options
Snowmelt
Member Posts: 1,415
I was totally lost when it came to steam zone you guys told me to rebuild it. I had to investigate because it had Honeywell on the valve but it was sold to another company, I found a supplier of the valve and ordered parts, then took the bonnet off and the bonnet was out of round so had to get that also. I didn’t want to attempt it last winter so waited till now to do it. I left before my guy put the last piece but I have good before and after pic....
0
Comments
-
Let us know how it works after it is completely rebuilt and working to control steam flow. Did you get an exact replacement with a characterized guide? A valve that size should open as slowly as possible.0
-
Well everything looked the same.... first time working on something that big0
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 61 Pipe Deterioration
- 884 Plumbing
- 5.9K Radiant Heating
- 376 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 59 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements