Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Old Steam fintube/convector?
Options
Chuck_17
Member Posts: 148
Can anyone ID this old steam convector/fintube?
The front face is about 11" (bottom of slope). This one is 4" deep. Some others are 6" deep. There are roughly 6 fins per inch.
Looking for capacity.
The front face is about 11" (bottom of slope). This one is 4" deep. Some others are 6" deep. There are roughly 6 fins per inch.
Looking for capacity.
0
Comments
-
You will find it here. https://heatinghelp.com/store/detail/e-d-r-ratings-for-every-darn-radiator-and-convector-youll-probably-ever-see
I don't have my own copy but others on the Wall do and may help. or you can just purchase your own copy.Edward Young Retired
After you make that expensive repair and you still have the same problem, What will you check next?
0 -
Thanks.
I didn't know about that one.0
Categories
- All Categories
- 87K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 115 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 107 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 983 Plumbing
- 6.3K Radiant Heating
- 389 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 48 Job Opportunities
- 18 Recall Announcements