Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Richmond Tankless won't turn on.
Options
JackW
Member Posts: 236
I have a Richmond Tankless water heater model RMTG-53DV for natural gas with a UMC-117 Main Remote Control. This morning I heard what sounded like a purge fan running but no hot water had been turned on so the unit was not firing. I checked it about a half hour later and the fan (or what ever it was) was still running so I turned the power off at the Main Remote Control. Now it won't turn back on again. If I hold the power button in it beeps after 3 seconds then show a "24" after 15 seconds. Will appreciate any thoughts on why It won't turn back on.
Thanks,
Jack
Please note: My tankless is a Richmond, not a Richland, I made a mistake in the name.
Thanks,
Jack
Please note: My tankless is a Richmond, not a Richland, I made a mistake in the name.
0
Comments
-
Found the problem.0
-
do tellknown to beat dead horses0
-
Hi JackW. I am currently experiencing the same thing. Can you please tell me how you resolved it? Thanks.0
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 60 Pipe Deterioration
- 848 Plumbing
- 5.8K Radiant Heating
- 372 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 39 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements