Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

What kind of burner is this?

FortyTwo
FortyTwo Member Posts: 46
Hi all,

Anyone know what kind of burner this is? I have it on one of my boilers and would like to learn about it and get any literature I can find but the plate tag somehow wore off.

Thanks!

Comments

  • STEVEusaPA
    STEVEusaPA Member Posts: 6,506
    Older 2 stage, hi-lo fire.
    I'd bet @EBEBRATT-Ed or @Steamhead would know.
    Can't really see the housing.
    steve
    FortyTwo
  • HVACNUT
    HVACNUT Member Posts: 5,804
    edited February 2020
    It's a Carlin 701CRD I think. IF I'm reading it right. See the nozzle data chart near the 2nd stage solenoid. About 12 revisions ago.
    FortyTwo
  • STEVEusaPA
    STEVEusaPA Member Posts: 6,506
    edited February 2020
    I forget the 'nut' ( @HVACNUT ) would probably know too!
    I was thinking old Carlin, but couldn't see enough of it.
    steve
    FortyTwo
  • HVACNUT
    HVACNUT Member Posts: 5,804
    > @STEVEusaPA said:
    > I forget the 'nut' ( @HVACNUT ) would probably know too!
    > I was thinking old Carlin, but couldn't see enough of it.

    I did an edit.
    FortyTwo
  • HVACNUT
    HVACNUT Member Posts: 5,804
    This might help.
    FortyTwo
  • FortyTwo
    FortyTwo Member Posts: 46
    Thanks all! I was confused about the red on the tag but that looks to be what it is.

    And found this image of another old Carlin with the old tag and it used to be red.
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 15,453
    It's a Carlin for sure, I am thinking larger like a 1050FFD or 1150FFD.

    getting the horsepower off the burner motor may help track it down
  • FortyTwo
    FortyTwo Member Posts: 46
    edited February 2020
    @EBEBRATT-Ed

    so that box on the left when zoomed in.. it might not be from my actual burner model? Like changed at some service or upgrade to something that says 701CRD?

    How do i get the horsepower off it?
    clammy
  • Steamhead
    Steamhead Member Posts: 16,796
    Definitely Carlin.

    What nozzle size and pump pressure is it running?
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 15,453
    It is probably a smaller burner than I originally thought. It doesn't have the extra enclosure for a motor contactor. Probably is a 701/801

    @FortyTwo

    Take a picture of the electrical box with the nozzle sizes and ratings on it and also the nameplate on the burner motor
  • FortyTwo
    FortyTwo Member Posts: 46
    @EBEBRATT-Ed @Steamhead

    Ok I'll get a pic of the nozzle size plate today. The nameplate on the burner motor is super faded. There's a pic of it in my first post. I'm not sure if I'll be able to open it up today to get a look at the what nozzle is in there.