Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Pipefitter's Cap
Alan (California Radiant) Forbes
Member Posts: 4,379
Does anyone have information on the hats or caps worn by plumbers or pipe fitters at the beginning of the 20th century? I remember Dan showing vintage pictures of tradesman where he said that journeymen wore different hats that the apprentices.
8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab
Two btu per sq ft for degree difference for a slab
0
Comments
-
@Alan (California Radiant) Forbes
I don't know about the hats, but I was told in NYC in the old day they traveled by Subway and had parts delivered to them (maybe they still do).
The plumber carried the tank and the apprentice carried the toilet!!1 -
@Alan (California Radiant) Forbes, is this the photo/article you're thinking of? https://heatinghelp.com/blog/how-bicycles-played-a-part-in-heating-history/
"The older men in the photo wear derbies, and I've learned that this means they are the Master plumbers. The younger men in the photo, the apprentices, are all wearing beanies. Imagine doing that today."President
HeatingHelp.com1 -
@Erin Holohan Haskell and @Alan (California Radiant) Forbes
I remember that article now.
Maybe we need "Heating Help" derbies & beanies? LOL
2 -
I like the idea behind the hats. You can tell with one look who's in charge.8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab0 -
Hello, Thinking of things I'd like to see in the HH store, I've had a Swiss army knife in my pocket for the last 50 plus years, but would happily replace it with a good HH Dead Man utility knife.
What tools would others like to see offered here? And, apologies if I'm taking the conversation sideways.
Yours, Larry1 -
0
-
These are always in my pockets.
8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab
1 -
Great ideas! We'll see what we can do. Thanks!
President
HeatingHelp.com0 -
Is the lower one a light saber?—NBC0
-
We've got a lot of ornery space cowboys out West here. It comes in handy.nicholas bonham-carter said:Is the lower one a light saber?—NBC
8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab0 -
Hi Alan. I think you might be remembering this.
https://forum.heatinghelp.com/discussion/144858/some-of-the-dead-men-showing-off#latest
Larry (Happily Retired)2 -
Bingo! Thanks, Larry.8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab0
Categories
- All Categories
- 86.8K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 425 Carbon Monoxide Awareness
- 108 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 959 Plumbing
- 6.3K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements