Skip to content
  • Register
    • Welcome! Here are the website rules, as well as some tips for using this forum.
    Need to contact us? Visit https://heatinghelp.com/contact-us/.
    Click here to Find a Contractor in your area.

    SOLD Cast Iron Radiators for Sale

    Michela
    Michela Member Posts: 3
    edited August 2019 in THE MAIN WALL
    SOLD
    Fully functional, ornate Pierce hot water, cast iron radiators for sale.

    I have 9 in total, pick up ASAP, located in White Plains, NY, $1350 for the lot, cash and collect only. In detail:

    2 small (6 tubes) 14“w x 8“d x 38“ h

    3 large (22 tubes) 57“w x 9“d x 22“h

    4 medium (10 tubes) 24“w x 9“d x 38“h

    Welcome

    It looks like you're new here. Sign in or register to get started.
    Sign In
    Register

    Comments

    • Steve Minnich
      Steve Minnich Member Posts: 2,868
      If I was in your area rather than Chicago, I'd scoop them up tonight.
      Steve Minnich
      Michela
    • Steamhead
      Steamhead Member Posts: 17,699
      Another fine old system getting the death penalty................
      All Steamed Up, Inc.
      Towson, MD, USA
      Steam, Vapor & Hot-Water Heating Specialists
      Oil & Gas Burner Service
      Consulting
      JakeCK
    • JakeCK
      JakeCK Member Posts: 1,496
      :(
    • Solid_Fuel_Man
      Solid_Fuel_Man Member Posts: 2,644
      Nah....those will be replaced with superior scorched air! So much more efficient than those boat anchors....

      I'm already a radiator hoarder, gotta stop!
      Serving Northern Maine HVAC & Controls. I burn wood, it smells good!
    • Steve Minnich
      Steve Minnich Member Posts: 2,868
      Here we go again.
      Steve Minnich
      Solid_Fuel_ManCanucker
    • Solid_Fuel_Man
      Solid_Fuel_Man Member Posts: 2,644
      I hope you read my sarcasm... cant help poking the bear sometimes.
      Serving Northern Maine HVAC & Controls. I burn wood, it smells good!
      Steve Minnich
    • Steve Minnich
      Steve Minnich Member Posts: 2,868
      It's all good. We just don't know everyone's story so I'm just suggesting that we're a little slower to judge. That's all. For all we know, they may have opted for panel rads?
      Steve Minnich
      Solid_Fuel_ManChrisJ
    • ChrisJ
      ChrisJ Member Posts: 16,578
      Steve Minnich said:

      It's all good. We just don't know everyone's story so I'm just suggesting that we're a little slower to judge. That's all. For all we know, they may have opted for panel rads?

      Agreed.
      However, I don't understand where $1350 comes from. That's certainly not the scrap value of cast iron.

      Single pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times.

    • Michela
      Michela Member Posts: 3
      Chris J: These are not salvage items, but meant for reuse. Also I‘ve seen them sell for a lot more. If you are interested make me a serious offer.
    • STEVEusaPA
      STEVEusaPA Member Posts: 6,505
      Are they currently hooked up to your system? Or already removed?

      There was an error rendering this rich post.

      Michela
    • Michela
      Michela Member Posts: 3
      Steve: removed as of 2 days ago.
    • Danny Scully
      Danny Scully Member Posts: 1,459
      @michela, what are they being replaced with?

    Welcome

    It looks like you're new here. Sign in or register to get started.
    Sign In
    Register

    Welcome

    It looks like you're new here. Sign in or register to get started.
    Sign In
    Register

    Quick Links

    Categories