Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
T&P valve question
Options
dennis73
Member Posts: 2
Can i replace a T&P valve with a value of 150psi, 210 F max 105,000 BTU with a valve with value of 150psi, 210 F, 500,000 BTU
0
Comments
-
Yes. In your case as long as the inlet and outlet of the T&P valve are the same size of what is there now.0
-
As in 3/4" inlet and 3/4" outlet.0
-
yes
0 -
and the probe needs to be long enough to reach into the tank.Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 51 Biomass
- 423 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 60 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 375 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 38 Industry Classes
- 55 Job Opportunities
- 18 Recall Announcements