Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Looking for a good mod/cond gas boiler installer in Rhode Island, converting to gas from oil.
Gida
Member Posts: 5
Any recommendations?
22-yo Weil/Mclein WGO-3 boiler cracked (3-Zone baseboard & Kick space heaters in house) with indirect DHW heater. I figure it's a good time to switch from oil and install a Viessman Vitrocrossal CU3A or similar. Current system is on a Tjerlund SS2 power venter (so that's a motivation).
22-yo Weil/Mclein WGO-3 boiler cracked (3-Zone baseboard & Kick space heaters in house) with indirect DHW heater. I figure it's a good time to switch from oil and install a Viessman Vitrocrossal CU3A or similar. Current system is on a Tjerlund SS2 power venter (so that's a motivation).
0
Comments
-
All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0 -
all baseboard.. I'd look at the weil mclain GV-90 plus.... whisper quiet..0
-
If you've picked a favorite,please tell me why you like that one (over the Vitocrossal)? Is it the technology, the
company, the service, reputation (both are quiet)? What makes you like that one best? Thanks.0
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 110 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 981 Plumbing
- 6.3K Radiant Heating
- 387 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements