Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Axiom MF200
Options
Tinman
Member Posts: 2,808
Using one for the first time on this current boiler job. I was very impressed with the product and people at the AHR Expo this past January. Anyone else using them? Feedback?
Steve Minnich
0
Comments
-
I have a few of them in use here and quite frankly have not had good luck with them. Seems like they have a problem with the transformer the most. I have one in my shop right now that is dead and am going to have to get another transformer for it.' One thing I did find is you really want to use the mounting bracket for it and get it above any potential water sources.
Other than that, they are a really nice setup.
Rick0 -
-
They switched to a different style power supply (transformer) about 5 years ago. Its a Switch Mode Power Supply, much more reliable.0
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 51 Biomass
- 423 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 60 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 375 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 38 Industry Classes
- 55 Job Opportunities
- 18 Recall Announcements