Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Furnace takes too long to ignite.
Options
esprami
Member Posts: 2
in Gas Heating
Our AirQuest furnace takes forever to light. It now takes 1 hour for it to ignite. This has never taken more than a few minutes. I don't know that's something I can fix or if I need to call someone. It's an upright, not horizontal. LP gas.
0
Comments
-
Plenty of gas in the tank?
If you turn the tstat up to 80 does this still happen?
During this hour what sounds does the furnace make, if any?0 -
Plenty of gas, I usually turn tstat to 78. It does make a constant sound and in an hour it finally kicks in and heats fine.
0 -
sounds like a bad t stat
"The bitter taste of a poor install lasts far longer than the JOY of the lowest price"0 -
Buzzing or clicking sound? Are you handy with a voltmeter.0
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements