Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Looking for Flame Rod lead wire.

Options
Dave338
Dave338 Member Posts: 6
in THE MAIN WALL
I need to find a source for the wire for flame rods. Anybody know where to buy it. Honeywell can't get it right now.
Thanks in advance

Comments

  • JUGHNE
    JUGHNE Member Posts: 11,062
    Options
    Some power burners I see the same type cable for ignition and flame sensing. Well insulated and temp rated but can be bulky for some installs.
    Dave338
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 15,546
    Options
    A burner supply house should have it. If not goggle "WESTWOOD PRODUCTS" & you could call them and see who you can buy from in your area
    Dave338
  • BobC
    BobC Member Posts: 5,478
    Options
    Asbestos wire was used in the past but it's pretty much gone the way of the dodo. Silicone rubber insulated wire should do well in that application.

    Bob
    Smith G8-3 with EZ Gas @ 90,000 BTU, Single pipe steam
    Vaporstat with a 12oz cut-out and 4oz cut-in
    3PSI gauge
    Dave338

Categories