Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Why is to much venting no good on a radiator?
Options
acl10
Member Posts: 349
Why is to much venting no good on a radiator?
0
Comments
-
Steam will take the least risistant path ...We use resistance to direct /control the steam .We use the resistance to balance the system ... We want to fill the mains with steam first ,next the riser- radiators.. We normaly want to fill ,all of the radiators ,at the same time .. Small to large, same time ....
There was an error rendering this rich post.
0 -
It's great for that radiator. Just not so good for all the other radiators.0
-
too fast can also jet the steam right to the vent,
and not let the rad heat to it's potential.
a delicate balance all around.known to beat dead horses0
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 427 Carbon Monoxide Awareness
- 119 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 114 Geothermal
- 165 Indoor-Air Quality
- 3.7K Oil Heating
- 76 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.6K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements

