Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Need replacement Push Nipples for Cast Iron 4-tube (17 Fin) One pipe steam radiator

Options
HeatherBrennan
HeatherBrennan Member Posts: 1
edited December 2017 in Strictly Steam
H​i​, I am repairing a steam cast iron single pipe radiator.

I removed leaking fin sections and found the push nipple rotted which caused the leak. Looking for repair part(s).

Radiator is stamped SD (or SP). Nipple OD is 1 3/4" and ID is 1 1/2". Length is 1 5/8" beveled on both sides. Photos attached.

Please call ​soonest ​at
612 812 2080

Comments

  • Steamhead
    Steamhead Member Posts: 18,180
    Try Oneida County Boiler Works:

    Address: 611 Mortimer St, Utica, NY 13501
    Phone: (315) 732-7914

    AFAIK, they're the only company still making these.
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting

Categories