Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Who made this manifold?
Options
JoeKos
Member Posts: 2
Trying to replace them all in a system where they are all leaking.
0
Comments
-
-
Thanks. Do they still make them? No one answers the phone at Embassy. I hope to just switch to Uponor.0
-
You can switch to an Uponor manifold, the pipe should be dimensionaly the same except don't expand this pipe. Use the QS compression fittings.
Dave H.Dave Holdorf
Technical Training Manager - East
Taco, Inc
1 -
SBK is the manufacturer, I use them regularly.
http://thermalproductsinc.com/wp-content/uploads/2010/06/SBK_Manifold.pdf0
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 114 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements