Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

steam valve restrictor

Options
ttigert
ttigert Member Posts: 1
in Strictly Steam
Looking for 3/4" steam valve restrictor, appox. 3 1/2" in length. Fits a 2 pipe system


Comments

  • JUGHNE
    JUGHNE Member Posts: 11,513
    IIWM I would put in a new valve with a separate drilled orifice installed in the valve spud union.
    What is the operating pressure and EDR of the radiation?
  • Gordo
    Gordo Member Posts: 857
    @ttigert : That looks like a Webster Sylphon type valve near the top of the picture.

    Did that orifice nipple come out of a convector by any chance?
    Was it threaded in vertically in the bottom end of that convector?

    To the best of my knowledge, that "restricter" is "OEM".



    All Steamed Up, Inc.
    "Reducing our country's energy consumption, one system at a time"
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Baltimore, MD (USA) and consulting anywhere.
    https://heatinghelp.com/find-a-contractor/detail/all-steamed-up-inc

Categories