Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Main Venting

Options
KayMac
KayMac Member Posts: 12
in Strictly Steam
I had my main vents upgraded 2 years ago and I believe they are Maid O Mist. I think the one closet to the boiler has failed already as it hisses the entire cycle. I am intrigued with the Big Mouth vents discussed on here and ready to order two if you can reassure me that they will fit on my system or let me know how to measure and purchase adapters. I have plenty of clearance in both locations (at least 6"). Thank you for your help.

Kathryn



Comments

  • Steamhead
    Steamhead Member Posts: 16,848
    Options
    How long are your mains, and what pipe size?
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • Sailah
    Sailah Member Posts: 826
    edited October 2016
    Options
    Kathyrn,

    The big mouth is 4 3/4" tall that includes all the threads. So installed height is probably around 4.1/4" after you thread it in.

    The stock tailpiece is 3/4" npt. That's what amazon has. If you require a 1/2" tailpiece I can send you one. It will reduce the capacity of the big mouth a little because the opening is slightly smaller.

    You'll need a 5/8" allen wrench to install the stock tailpiece. Looks like you have at least 3/4" pipe there so it should easily fit.
    Peter Owens
    SteamIQ
  • KayMac
    KayMac Member Posts: 12
    Options
    I just placed the order on Amazon. I was going to replace the failed vent anyway and believe I needed to increase the venting there too. This seems like the perfect solution. Thank you!

Categories