Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

HTP Pioneer

Options
Docfletcher
Docfletcher Member Posts: 490
in Gas Heating
Any of you guys have experience with HTP Pioneer boilers. I'd like to know your thoughts on the product. Thanks

Comments

  • EzzyT
    EzzyT Member Posts: 1,367
    edited March 2016
    There a great product easy to install and maintaine.
    This is a install we did about little more then a month ago.
    E-Travis Mechanical LLC
    Etravismechanical@gmail.com
    201-887-8856
    Docfletcher4Johnpipe
  • Docfletcher
    Docfletcher Member Posts: 490
    Very nice install you & your crew did.
  • Rich_49
    Rich_49 Member Posts: 2,781
    Great units , well designed and thought out . Have not had any issues with any of the several we have installed . Where else can you get a boiler , buffer tank , dirt separator in one unit ?
    You can leverage the mass very well also with proper programming .
    You didn't get what you didn't pay for and it will never be what you thought it would .
    Langans Plumbing & Heating LLC
    732-751-1560
    Serving most of New Jersey, Eastern Pa .
    Consultation, Design & Installation anywhere
    Rich McGrath 732-581-3833
  • Docfletcher
    Docfletcher Member Posts: 490
    I want the mass for help with micro zones. Been getting allot of coaching from Hatterasguy. I was looking at the knight KHN floor boiler but I don't think it's gonna work out.
  • SWEI
    SWEI Member Posts: 7,348
    Nice work.

    Not unique to HTP, but it's kind of a shame to have to transition from PVC to Centrotherm -- especially when quite a few boilers have Centrotherm OEM parts inside them. Time to ship them set up for PP without the need for appliance connectors IMO.
    Rich_49
  • Docfletcher
    Docfletcher Member Posts: 490
    edited May 2016
    Diregard please delete
  • Henry
    Henry Member Posts: 998
    HTP is an "install and forget" great manufacturer. Call backs are virtually unknwn. BTW, do I see cast iron body pumps on the potable water?
  • Docfletcher
    Docfletcher Member Posts: 490
    Cast iron on Ezzy's install? I doubt it. As for me I don't think the Pioneer lends itself to the space I need it to go. I have put off replacing my boiler for the time being.
  • Paul S_3
    Paul S_3 Member Posts: 1,288
    No thats a bronze pump..... @EzzyT clarified that when he first posted the installation a few months back
    ASM Mechanical Company
    Located in Staten Island NY
    Servicing all 5 boroughs of NYC.
    347-692-4777
    ASMMECHANICALCORP@GMAIL.COM
    ASMHVACNYC.COM
    https://heatinghelp.com/find-a-contractor/detail/asm-mechanical-company

Categories