Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Wall Radiator
Matthias
Member Posts: 38
Does anyone know how to properly measure wall hung steam radiators? I have run into many of these here in Philadelphia. I have the EDR book, but can't understand the way the square footage of the rads are figured out. I have attached a picture. Thanks in advance.
0
Comments
-
Some of the manufacturers showed the dimensions but not the ratings. Take a look at the Wall radiators on page 130 of E.D.R. Does that get you close?Retired and loving it.0
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.6K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 970 Plumbing
- 6.3K Radiant Heating
- 386 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements