Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Used Caleffi Series 548 1.25" Hydro Seperator

Options
BigRob
BigRob Member Posts: 332
in Buy, Sell, Barter
Unit is in good shape. It was used for a little more than a year. You will need 4 new fiber seals.

$250 + shipping from California.

Comments

  • wogpa67
    wogpa67 Member Posts: 238
    Is this npt or sweat? And do you still need an alpha? I have one I bought for a job and ended up using a 15-58 instead.
  • hot_rod
    hot_rod Member Posts: 26,563
    I'm curious how you come across a used sep? I can mail fiber gaskets to the new owner.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • BigRob
    BigRob Member Posts: 332
    wogpa67 said:

    Is this npt or sweat? And do you still need an alpha? I have one I bought for a job and ended up using a 15-58 instead.

    Sorry man, it sold on eBay.
  • BigRob
    BigRob Member Posts: 332
    hot rod said:

    I'm curious how you come across a used sep? I can mail fiber gaskets to the new owner.

    Very nice of you, Rod! I'll PM the address to you.

    I swapped in a SEP4 to our condo complex boiler room. Past experience and a bucket of iron oxide has me paranoid about oxygen. The 548 was installed after all of that drama- just wanted more air removal and the magnet. Overkill is underrated.

Categories