Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Kolher wall radiator

Does anyone have EDR information on Kolher wall radiators? Any information would be great! Thanks in advance.

Comments

  • Danny Scully
    Danny Scully Member Posts: 1,416
    Anybody?
  • Mark N
    Mark N Member Posts: 1,115
    How do their dimensions compare to other wall rads? If their dimensions are similar I would thing the rating would be similar. I don't have dan's book EDR.
  • BobC
    BobC Member Posts: 5,476
    Just wrap a string around the elements (tubes) and calculate the surface area, it takes about 10 minutes.

    Bob
    Smith G8-3 with EZ Gas @ 90,000 BTU, Single pipe steam
    Vaporstat with a 12oz cut-out and 4oz cut-in
    3PSI gauge
  • Fred
    Fred Member Posts: 8,542
    I don't see Kolher radiators listed in Dan's EDR book. Are you sure it is not a different radiator that might have been rebranded as Kolher? Any other markings on it? Is it cast iron or pressed steel?
  • Danny Scully
    Danny Scully Member Posts: 1,416
    edited November 2014
    Cast iron, no other markings. It's similar to other rad dimensions but the EDR seems crazy (high), unless I'm misunderstanding the calculation.
  • Fred
    Fred Member Posts: 8,542
    Cast iron, how wide? How tall, how deep? Is it column or tube and how many sections? With that onfo one of us can calculate the EDR and see how close we are to what you think it is.
  • Danny Scully
    Danny Scully Member Posts: 1,416
    I'm a plumbing/heating contractor and I calculated it in this manner, I just think its high. I was hoping someone had some old brochure for kolher wall hung radiators to be honest. I can't find anything :(
  • Steamhead
    Steamhead Member Posts: 16,796
    Hi Danny- the Kohler rads I've seen were similar to others made around the same time. By this time the ratings were pretty much standardized. But go ahead and post a pic- there's a chance it could be unique, and anyway we'd like to see it.
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • Danny Scully
    Danny Scully Member Posts: 1,416
    edited November 2014
    having trouble posting pic, can I not post from my phone?
  • Steamhead
    Steamhead Member Posts: 16,796
    Try shrinking them to roughly 600x460 and see if that works.
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting