Skip to content
  • Register
    • Welcome! Here are the website rules, as well as some tips for using this forum.
    Need to contact us? Visit https://heatinghelp.com/contact-us/.
    Click here to Find a Contractor in your area.

    Cast iron rads for sale near Pottstown PA.

    Novagen_Ed
    Novagen_Ed Member Posts: 45
    in Buy, Sell, Barter
    All removed from working 1 pipe steam system in 2011, following sizes are H x L x D. All are Crane unless noted. NO SCRAP DEALERS please! , Cash and carry, pickup near Pottstown PA. (QTY 1) 19 x 39 x 8 (16 sections) $350 (QTY 2) 24 x 36 x 8 (15 sections) $300.00 each or BOTH for $550.00 (QTY 1) 19 x 32 x 7 1/2 (13 sections) $275.00 (QTY 1) 24 x 24 x 6 (10 sections) $250.00 (QTY 2) 36 x 19 x 6 (8 sections) $250.00 each or BOTH for $450.00 (QTY 1, unknown MFG.) Wall hung 24 x 26 x 2 3/4, with 2 brackets, $225.00





    Welcome

    It looks like you're new here. Sign in or register to get started.
    Sign In
    Register

    Comments

    • RobG
      RobG Member Posts: 1,844
      Uh Oh, you just made Steamhead an angry man! :o
      Novagen_Ed
    • Novagen_Ed
      Novagen_Ed Member Posts: 45
      LOL! Well, I am trying to find them a good home...... ;)
    • vaporvac
      vaporvac Member Posts: 1,520
      Hi. I know you wrote it was a one-pipe system, but could the wall hung rad work with two-pipe? It's hard to see the details.
      Two-pipe Trane vaporvacuum system; 1466 edr
      Twinned, staged Slantfin TR50s piped into 4" header with Riello G400 burners; 240K lead, 200K lag Btus. Controlled by Taco Relay and Honeywell RTH6580WF
    • Novagen_Ed
      Novagen_Ed Member Posts: 45
      Hi vaporvac. Thanks. I posted 2 more pictures, left and right ends of the rad. Looks like each side has a top and bottom tap, each with a hex head plug except, of course, bottom left.
    • vaporvac
      vaporvac Member Posts: 1,520
      edited October 2014
      I'm going to go get an exact measurement. How much do you reckon it weighs? Also, do you know how far out the bracket extend; I only have about 6" behind the door.
      Two-pipe Trane vaporvacuum system; 1466 edr
      Twinned, staged Slantfin TR50s piped into 4" header with Riello G400 burners; 240K lead, 200K lag Btus. Controlled by Taco Relay and Honeywell RTH6580WF
    • Novagen_Ed
      Novagen_Ed Member Posts: 45
      Hi vaporvac. The brackets measure 3 1/4 inches deep, back of flange to tip of hook. I can actually lift this one, so I figure the weight to be 100 Lbs or less....
    • keylargo1
      keylargo1 Member Posts: 2
      What is the dimension from wall to face of radiator? I have a similar situation.
    • Novagen_Ed
      Novagen_Ed Member Posts: 45
      Hi keylargo1. The brackets stand the radiator's front face out about 3 inches from the wall. The front of the bracket "hooks" are an additional 1/2 inch thick beyond radiator's front face.

    Welcome

    It looks like you're new here. Sign in or register to get started.
    Sign In
    Register

    Welcome

    It looks like you're new here. Sign in or register to get started.
    Sign In
    Register

    Quick Links

    Categories