Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

RPA Boiler room Show #2

Options
Rich_49
Rich_49 Member Posts: 2,785
edited September 2014 in THE MAIN WALL
Anyone who has some time to invest should hear this . Thermal storage batteries & site derived vs site generated .
http://www.youtube.com/watch?v=TCzopvJUivQ
You didn't get what you didn't pay for and it will never be what you thought it would .
Langans Plumbing & Heating LLC
732-751-1560
Serving most of New Jersey, Eastern Pa .
Consultation, Design & Installation anywhere
Rich McGrath 732-581-3833

Comments

  • Mark Eatherton
    Mark Eatherton Member Posts: 5,875
    We had a Lunch and Learn webinar for the RPA today, and it was on Phase Change Materials, a.k.a. PCM's. These can be adjusted to change phase anywhere between 0 C and 60 C. My thought is that with these tied into a TBS, and set to activate at around say 50 or 60 degrees F, making these storage batteries DOUBLE effective. Phase changes at the top and bottom of their temperature range.

Categories