Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Propress for pex

STEAM DOCTOR
Member Posts: 1,500
Does anyone have any experience using the Propress on pex tubing? Any pros, cons, limits in types of tubing, effects on flow rates,pressure drops, etc etc.
Thanks
Thanks
0
Comments
-
If you mean the stainless viega crimp rings, they work well. Downside is you need good access to get tool/jaw on, but they are very durable.0
-
Can the viega press fittings be used on all brands of pex or just viega pex?
Thank you.0 -
I've seen mix and matches but personally I stick to proprietary matches. Just a liability thing.0
-
Categories
- 117.8K All Categories
- 82.9K THE MAIN WALL
- 2.7K A-C, Heat Pumps & Refrigeration
- 44 Biomass
- 406 Carbon Monoxide Awareness
- 10 Chimneys & Flues
- 1.6K Domestic Hot Water
- 4.3K Gas Heating
- 107 Geothermal
- 149 Indoor-Air Quality
- 2.7K Oil Heating
- 45 Pipe Deterioration
- 695 Plumbing
- 4.9K Radiant Heating
- 353 Solar
- 13.3K Strictly Steam
- 2.9K Thermostats and Controls
- 48 Water Quality
- 31 Industry Classes
- 65 Job Opportunities
- 12 Recall Announcements