Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Say this the other day

Options
Hilly
Hilly Member Posts: 429
in THE MAIN WALL
Is there anything even logical about this install? Great way to utilize the old compression today. This is the stuff I see all the time. And I believe that's a 23 kWh boiler in a attached both sides row house, 2 story with about 500sq per floor. I didn't do a heatloss or anything but I know it's grossly oversized. I wasn't there heating related and there was nobody there to voice an opinion but this is the 'heating professionals' at their best in my neck of the woods.

Comments

  • icesailor
    icesailor Member Posts: 7,260
    Proud:

    You can rest assured that they, the installers, are really proud of their work and would be extremely upset if anyone criticized.

    Including the solder grapes on the copper sweat fittings.
  • Drewser
    Drewser Member Posts: 34
    Umm...

    That is....um....people get PAID to do that?! Cripes, I'm in the wrong industry.
  • Jean-David Beyer
    Jean-David Beyer Member Posts: 2,666
    Does the unopened envelope in the middle picture...

    contain the installation manual? The one the installer never read?



    Also, around here they seriously want the backflow preventer vent to go right down near the floor, and no plastic tubing on the PRV.

Categories