Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Identify these radiators......
Options
The Steam Whisperer (Formerly Boilerpro)
Member Posts: 834
Hi,
I am not sure if these are wall hung single tube radiator or wall hung sectionals. I have two different EDR ratings for these two types. They are 4 1/2 inches deep and I was assuming if they are simply wall hung single tube radiators I just need to add about 4 inches to the height to get the equivalent floor standing radiator output.
I am not sure if these are wall hung single tube radiator or wall hung sectionals. I have two different EDR ratings for these two types. They are 4 1/2 inches deep and I was assuming if they are simply wall hung single tube radiators I just need to add about 4 inches to the height to get the equivalent floor standing radiator output.
There was an error rendering this rich post.
0
Comments
-
They're "single-column" rads
add the leg height and you've got it.All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0 -
Thanks! (NM)
.There was an error rendering this rich post.
0
Categories
- All Categories
- 87.6K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 430 Carbon Monoxide Awareness
- 124 Chimneys & Flues
- 2.2K Domestic Hot Water
- 5.9K Gas Heating
- 120 Geothermal
- 168 Indoor-Air Quality
- 3.8K Oil Heating
- 78 Pipe Deterioration
- 1K Plumbing
- 6.6K Radiant Heating
- 394 Solar
- 16K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements