Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Radiator manufacturer
Options
dabrakeman
Member Posts: 552
We have all heard of American Radiator Co when it comes to radiators. However, "US Radiator Co". Has anyone heard of this manufacturer as a manufacturer of radiators? Any history?
0
Comments
-
Try this:
http://www.heatinghelp.com/article/145/Long-gone-Manufacturers/1067/The-Complete-Line-of-the-United-States-Radiator-Corporation
Then browse the Library for more great stuff.All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0 -
ornate radiator
Thank you. I did actually find that catalogue online last night but it did not have anything that looks quite like the one I am considering buying. All the radiators in the catalogue are rather plain whereas this one appears more ornate.
I attached a picture of the entire radiator that corresponds to the casting ID I sent earlier.0 -
Same company
but the ornate style was discontinued around 1920. Ratings were standardized by then, so if that's what you need, go ahead and use the tables for the plain ones.All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 130 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 61 Pipe Deterioration
- 885 Plumbing
- 5.9K Radiant Heating
- 376 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 59 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements