Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Big steam pipes (6") need big wrenches (48")

Options
JohnNY
JohnNY Member Posts: 3,341
in Strictly Steam
Just saying.
Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
Consulting & Troubleshooting
Heating in NYC or NJ.
Classes

Comments

  • ChrisJ
    ChrisJ Member Posts: 17,068
    Yep

    I bought two 4 foot wrenches when I put the boiler in.  Only thing was it seems like they are too big for 3 inch stuff so I was kind of gentle with them.

    Single pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times.

  • Steamhead
    Steamhead Member Posts: 18,194
    But do you have

    a 5-foot wrench?



    We do.



    ;-)
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • ChrisJ
    ChrisJ Member Posts: 17,068
    5 foot

    Frank, wasn't your 5 footer also aluminum?

    Single pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times.

  • Steamhead
    Steamhead Member Posts: 18,194
    Nope

    they don't make an aluminum 5-footer. 
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • JStar
    JStar Member Posts: 2,752
    5 foot

    Ours just arrived last week! I made our apprentice dead lift it over his head to test it out.
This discussion has been closed.

Categories