Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Viessmann low loss header substitution
Options
Canecreek
Member Posts: 21
Anyone know where I can get a Viessmann LLH for aWB2B 35?
There are plenty of substitutions out there with an air vent on top or a 1/2" npt that could be used for the header sensor but I am unsure about the well.
Is there a reason the 120/80 will not work? This header is readily available.
There are plenty of substitutions out there with an air vent on top or a 1/2" npt that could be used for the header sensor but I am unsure about the well.
Is there a reason the 120/80 will not work? This header is readily available.
0
Comments
-
LLH
Why can't the company that sold the appliance provide one?
The smallest LLH sold has a max flow of 17gpm.
If the Caleffi hydraulic separator is used, the sensor can be strapped to the system supply outlet of the device0 -
Viessman LLH
Thanks Paul,
I was ableto get a 80/60 ordered this AM with sensor0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements
