Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Looking for old style 1/14 angled radiator valve ( steam )

We took out an old damaged 1/14 angled steam radiator valve but now find that the new models have different dimensions and are too low to line up with our existing radiator. I have checked online, but all current models and brands seem similar dimensions and the connection with the radiator ends up being half to a quarter inch too low. See attached picture for reference - this one sits too low and cannot be connected to the radiator. If anyone has an higher old style 1 1/4 angled steam radiator valve for sale , let me know !
0
This discussion has been closed.
Categories
- 80.9K THE MAIN WALL
- 2.5K A-C, Heat Pumps & Refrigeration
- 36 Biomass
- 394 Carbon Monoxide Awareness
- 2.6K Controls
- 1.4K Domestic Hot Water
- 3.7K Gas Heating
- 101 Geothermal
- 130 Indoor-Air Quality
- 2.3K Oil Heating
- 30 Pipe Deterioration
- 565 Plumbing
- 4.2K Radiant Heating
- 333 Solar
- 12.1K Strictly Steam
- 36 Water Quality
- 7 Industry Classes
- 52 Job Opportunities
- 7 Recall Announcements
Comments
NEVER HEARD OF THAT HAPPENING. SOUNDS LIKE THE LINE DROPPED. been in the trade since 1961 bob nyc
Not sure, this may have been a much older valve. In any case, I got a new one, and ( with a bit of force ) was able to connect it. Thanks.