Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
EK2K...Any one have....
Options
kcopp
Member Posts: 4,630
a legible diagram that I can use to wire in an extra zone valve on a classic energy manager?
ty,kcopp
ty,kcopp
0
Comments
-
EK
The zone valves are only 2 wires. Is the manager maxed out on zones?0 -
I have a 2 wire...
HW zv. Two zones are used on a 4 unit manager. I am adding a third.0 -
EK-2
Kevin, check your e-mail0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements