Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Floor thickness for underfloor installation

Options
Helpless533
Helpless533 Posts: 18
in Radiant Heating
My home is 95 yrs old. The first floor has new pre finished hardwood floors installed over old flooring. The thickness is 1 5/8 in.



Is this floor too thick for the pex type radiant that I see installed from the basement of the home?

Does anyone have any realistic ideas for heating the 2nd floor? (I am looking to convert from steam) Are the celing radiang panels worth anything? Or would the only option be to take down the plaset celings on my 1st floor and istall form underneath?

Thanks

Comments

  • Gordan
    Gordan Member Posts: 886
    Yes, ceiling panels are worth something

    They're a viable retrofit option, and will work off of lower temperatures than the between-the-joists extruded plates.
  • Gordy
    Gordy Member Posts: 9,546
    Radiant ceilings

    By all means use them they are very effective, and comfortable. You don't have to worry about floor coverings, and furniture blocking output
This discussion has been closed.

Categories