Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit

beckett clean cut screen

sparkie Member Posts: 46
Hello everyone, havent been here in a while and hope all is well with you all. My question is this---- are there any special procedures or tecnique for changing the screen on a clean cut pump. The replacement one i have came with an "o" ring and not a gasket.     Thanks


  • billtwocase
    billtwocase Member Posts: 2,385
    sounds like

    you have a Riello strainer and "O" ring. Clean-Cut pumps use the same 70 series Suntec strainer and gasket.
  • STEVEusaPA
    STEVEusaPA Member Posts: 5,441
    edited September 2012
    Or you may have

    A danfoss strainer
This discussion has been closed.