Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

HTP elite plus 10:1 turn down

Options
Gordy
Gordy Member Posts: 9,546
in THE MAIN WALL
Anyone use it yet? I see it's only 93% efficient compared to the elite, and the elite FT which are 96-97% efficient.

Comments

  • Rich_L
    Rich_L Member Posts: 84
    Nope I haven't, yet

    Gordy, I'm sure you're well aware that the 96 to 97% efficiencies are only achieved with the coolest return temps and in "low temp" applications. Depending on where you would install it that could make the 96 or 97% vs. 93% a moot point.



    Best regards,

    Rich
  • Mark Eatherton
    Mark Eatherton Member Posts: 5,875
    Note:

    Unit ships set for 20:1 in order to comply to ANSI standards, but can be field adjusted to the lower potential setting.



    Interesting bent...



    ME
This discussion has been closed.

Categories