Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Cleaning Stains off of copper and brass
Options
Rob Blair
Member Posts: 227
What is the best method (other than prevention) for cleaning the stains near fittings and valves? (Green)
Also, what about cleaning the mess made by leaking glycol?
Thanks,
Rob
Also, what about cleaning the mess made by leaking glycol?
Thanks,
Rob
0
Comments
-
Steel wool
Steel wool, or a wire wheel in a drill.
In short, elbow grease.0
This discussion has been closed.
Categories
- All Categories
- 87.6K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 430 Carbon Monoxide Awareness
- 124 Chimneys & Flues
- 2.2K Domestic Hot Water
- 5.9K Gas Heating
- 120 Geothermal
- 168 Indoor-Air Quality
- 3.8K Oil Heating
- 78 Pipe Deterioration
- 1K Plumbing
- 6.6K Radiant Heating
- 394 Solar
- 16K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements