Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
spin on oil filters
Options
210glen
Member Posts: 3
Been finding spin on oil filters leaking shortly after service. B5 fuel is being used. I know the bio gasket is to be installed with bio fuel but, its never been a problem in years past with B5 and, using the stock gasket. Any one else finding this, any ideas.
0
Comments
-
Leaking Spin-On's:
I usually put some Super-Lube synthetic winch grease on the top of the O-ring gasket. I've had few leaks, if any. I use it for about everything because it doesn't cause butyl nitrate rubber o-rings to swell up.0 -
Any particular brand?
I've run B2 in my house for the past 3 years, 2 filters, spin on never leaked after replacement. And never really had a leak on anyone elses. Just wondering if a particular brand came up with something 'new & improved'There was an error rendering this rich post.
0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 114 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements
