Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
hb smith?
Options
jonny88
Member Posts: 1,139
in Oil Heating
cant afford burnham iq. is slantfinns oil boilers reliable or hb smith.two different people gave me two different opinions in my supply house
0
Comments
-
Intrinsically
they are the same, the installer makes the difference,not who cast the iron!0 -
hbsmith
thanks mr.o brien.i was looking at hb smith as they say they make a high water content boiler thus preventing short cycling.i was going to go with a burnham and ergomax as a buffer tank but a couple of bills came in and a stupid achilles tendon broke,such is life.i actually played phone tag with you a few times about doing a heat loss on my house.weilmclein had something good on their site for doing this and also my supply house guy gave me a formula which he says gets a pretty close number.LxWxH4 will give the btuh for each room.he swears by it but i think you are going to chuckle.thanks again.0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 427 Carbon Monoxide Awareness
- 119 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 165 Indoor-Air Quality
- 3.7K Oil Heating
- 76 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.6K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements
