Welcome! Here are the website rules, as well as some tips for using this forum.

Need to contact us? Visit https://heatinghelp.com/contact-us/.

Click here to Find a Contractor in your area.

If our community has helped you, please consider making a contribution to support this website. Thanks!

CHANGES

Options

DanHolohan

DanHolohan Member, Moderator, Administrator Posts: 16,686

March 2010 in THE MAIN WALL

At your request, I've had AMA change the security code from letters and numbers to a simple math problem. Also, you'll only have to solve the math problem once for each of your sessions on the Wall. I hope that makes your experience here even better.

Thanks for the feedback and suggestions!

Retired and loving it.

0

Comments

gerry gill Member Posts: 3,083

March 2010

Thank you, thank you, thank you..

it was a cause of much grief for me too..

gwgillplumbingandheating.com
Serving Cleveland's eastern suburbs from Cleveland Heights down to Cuyahoga Falls.

0
JStar Member Posts: 2,752

March 2010

Oh no...Math!

The threat of math is enough to make you stop and think about every post before hitting submit.

0
Mark Eatherton Member Posts: 5,875

March 2010

Thats a big 10-4...

Thanks for all you do Dan

ME

0
jpf321 Member Posts: 1,568

March 2010

i thnk ME means "6"

10-4=6

1-pipe Homeowner - Queens, NYC

NEW: SlantFin Intrepid TR-30 + Tankless + Riello 40-F5 @ 0.85gph | OLD: Fitzgibbons 402 boiler + Beckett "SR" Oil Gun @ 1.75gph

installed: 0-20oz/si gauge | vaporstat | hour-meter | gortons on all rads | 1pc G#2 + 1pc G#1 on each of 2 mains

Connected EDR load: 371 sf venting load: 2.95cfm vent capacity: 4.62cfm
my NEW system pics | my OLD system pics
0
Timco Member Posts: 3,040

March 2010

thanks

Thank you Dan..

Tim

Just a guy running some pipes.
0
EddieG Member Posts: 149

March 2010

For real?

Now I will have to keep a caculator handy! LOL Just kidding! You can't please them all! Thanks for all you do Dan!

0
Hitzkup Member Posts: 63

March 2010

Thanks!

Thanks!

---

Q: 10 + 0, do you have a calculater handy?

0

This discussion has been closed.