Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Heat loss
Options
lilnick
Member Posts: 1
Hey I have a question,thats a little pathetic considering my years of experience in this field. does anyone know of a program or a place that i can properly learn to do a heat loss calculation to size H.W. jobs, and to also size A/C equiptment properly. Thanks in advance.
Lil Nick
Lil Nick
0
Comments
-
Try the
TACO load calc which is free or contact wrightsoft which has a complete software program for load calcs, duct sizing, hydronics and more which I am not up on.
Thanks,
Minnesota Wayne0 -
Heat loss software
is a very useful tool to have in your repertoire. I have been using Wrightsoft for decades. It's a little expensive and I needed help in learning to use it at first but once I got it figured out it has been a powerful tool. I started out using a little program called EZ Loss that I ordered from the back of a trade magazine. It was very easy to use and I believe it is still around.0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 150 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 372 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 39 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements