Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Long Term Oil Storage

Damon
Member Posts: 32
in Oil Heating
Like 1-3 years of a 275 gal tank that's 3/4 full. What do you guys use? Beckett FuelArmor? I'm taking over a house that was used yr round and using it as a summer home so it will take a long time to use up that oil and I don't want to kill my nice Thermo Pride OL5-85RDA (Beckett AF) . Last delivery of 165 gal was in April. Any suggestions for mothballing the furnace (we'll be using the AC though)? Will the oil co pump out the oil?
0
Comments
-
Fuel Armor
Fuel Armor should do the trickTo learn more about this professional, click here to visit their ad in Find A Contractor.0 -
I went with Fuel Right EP
for the following reasons:
Some recommendations here
I could find an MSDS sheet for it
It was cheaper than FuelArmor
I like the simple jar test on their website
The different brands are all probably mostly the same with a little variation in concentration and/or type of ingredients anyway. Basically one needs organic dispersants, corrosion inhibitors, biocides and anti-oxidants which all claim to have.0
This discussion has been closed.
Categories
- All Categories
- 87.1K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 427 Carbon Monoxide Awareness
- 117 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 111 Geothermal
- 163 Indoor-Air Quality
- 3.7K Oil Heating
- 72 Pipe Deterioration
- 1K Plumbing
- 6.4K Radiant Heating
- 393 Solar
- 15.5K Strictly Steam
- 3.4K Thermostats and Controls
- 55 Water Quality
- 51 Industry Classes
- 49 Job Opportunities
- 18 Recall Announcements